Simulation Camera Lens Humidifier

1) Shape: Camera Lens 2) Material: ABS 3) Product Size:(H) 17.6cm x (Dia) 10.6cm 5) Individual Package: 1pc /gift box

Product Detail Descriptions:

1) Product Size:  (H) 17.6cm x (Dia) 10.6cm  

2) Material: ABS

3) N.W./PC:  24.6g ( with box: 320g)

4) Power Supply : DC 5V

Package:

1) Individual Package: 1pc/ colorful gift box 

2) Qty/Ctn: 50pcs 

3) Ctn Size:  57*57*39cm

4) G.W./ N.W.: 16.5kgs/ 15kgs

5) Box Size: 11*11*18.5cm

6) Accessories  :

Camera Lens humidifier accessories: USB cable, absorbent cotton (2).+ 1 instruction

Technical safety guidelines:

Caution:  

Fill the water tank with appropriate amount of water, do not exceed the water line marked inside the tank. Please read the product instructions before using.

Method Of use:

1. Computer power supply

Place the humidifier on flat surface, and connect the USB cable with DC socket on the end and with computer USB port on the other end.

Note: Please confirm adequate power supply at the USB port. Inadequate power supply of front USB port and USB port of vintage mainboard will lead to small steam.

2. Vehicle power supply

Fix the humidifier into the holder, and connect the USB cable with DC socket on the end and with mobile USB port on the other end. Plug the power converter into cigarette lighter socket.

Note: Mobile power converter output shall be over DC 5v 350mA. Poor quality mobile power converter will lead to small steam.

3. Power adapter power supply

Place the humidifier on flat surface, and connect the USB cable with DC socket on the end and with AC power adapter USB port on the other end. Plug the AC power adapter into indoor power socket. 

Precautions :

Water in use shall be clean tap water or distilled water to prevent impurities from blocking the ultrasonic tablet.Do not place the cover upside down while filling water in, or otherwise water in the absorbent cotton will flow back.The humidifier works at DC 5V. Any power supply holds inconsistency with the humidifier will cause serious damage to the deviceThe humidifier shall not work under high temperature or humidity.Do not scratch the atomizing tablet with sharp points.Don’t wash the device with water, or otherwise short circuit shall be caused.Fill in water upon sharp or abnormal sound or smaller steam.Factors such as air flow, room humidity and ventilation will make water steam condense on the surface of desk or other objects (a small piece of cloth under the device is highly recommended).

Device Routine Maintenance:

1. Weekly fouling cleaning is recommended.

2. Soft wet cloth is recommended for external cleaning to avoid damage to appearance.

3. Atomizing chip can be cleaned with edible vinegar soaked cotton swab.

4. White dirt on atomizing tablet can be cleaned with soft cloth.

5. In case of long idle, empty and dry the cup and pull out the absorbent cotton.

Extended Functions

Addition of radix isatidis infusion, Houttuynia injection or disinfectant at the proportion of 1:20 to the water can effectively prevent influenza.A few drops of vinegar in the water can perform the function of sterilization. Light salt brine added to the water can relieve laryngalgia and chronic pharyngitis.A few drops of floral water can drive mosquitoes and ease children nasal congestion.Place the device beside a computer to remove static electricity and alleviate harmful radiation.Note: Do not add essential oil to the cup which will block the atomizing chip and cause damage to the humidifier. 

Breakdown Maintenance

Breakdown	Cause	Solution
No water spray	The cup is not filled. / The power supply is not connected. / The switch is not turned on. / The absorbent cotton is broken.	Fill the cup. / Correctly connect with the power supply. / Switch the power on. / Replace the absorbent cotton.
Significantly smaller steam	The absorbent cotton gets loose. / Inadequate water left in the cup.	Screw the absorbent cotton tube tight. / Add water.

Simulation Camera Lens Humidifier